6 Steps on How to Make Office Chair Higher to Ensure a Comfortable Posture for Head and Neck

Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from Amazon, include: price, content, image, logo, brand, feature of products which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission at no extra cost to you.. Read more.

Are you one of the millions of people who spend long hours hunched on an office chair? You are just sitting, but it must be tiring and uncomfortable, especially if the height of your seat is not correctly adjusted. The question is, do you know how to make office chair higher? What can you do to correct the height properly?

An office chair that isn’t correctly adjusted is bad for your health. It can put a lot of strain on your body, causing all kinds of pains and aches. While you do have an ergonomically designed cushioned chair, the height isn’t comfortable. It’s a good thing you can quickly correct it to ensure a relaxed posture in 6 easy steps.

I am also someone who spends eight or more hours in front of a computer. The pain on my neck and back has always been a big problem for you. No way I’m going to tough it up knowing how it can ruin my health. So, I searched online and compiled here the simple steps on how to make office chair higher for your convenience.

Check them out below!

How to make office chair higher

Popular Products

Materials Needed

In this DIY project, you will need only a few things. They are:

Adjusting Office Chair with Threaded Post

  • The office chair
  • Screwdriver
  • Lubricant
  • Cleaning rags

Adjusting Traditional Office Chair 

  • The office chair
  • Screwdriver
  • Long nuts or screws
  •  Wood pieces

These are items readily available in your home, so you don’t need to worry about buying anything. If you don’t have them at home, you can always just borrow them from a friend or neighbor. 

make office chair higher

How to Make Office Chair Higher - Step by Step Instructions

Follow these simple steps on how to make office chair higher:


Determine the Proper Height

Start by determining the best height of the chair that is comfortable for you. Sit on it upright with your chair comfortably on the floor. Your thighs and calves must be at a 90-degree angle. Measure the length you need to readjust the seat and write it down. 


Identify the Type of Chair

It’s also essential to identify the type of your chair. Older models have a thread post, while newer ones have levers for height adjustment just underneath. Some models don’t have either, which will be a little challenging to adjust. Taking note of the type of chair helps you determine the proper way to readjust it. 


Consider the Height of Your Desk

Besides the proper height that you’ll be comfortable with, you also need to consider your desk. Some desks have a keyboard tray in it, which means the office chair has to be readjusted based on that. If it’s a standard desk, then correcting the chair’s height for comfortable seating will be considering the desk’s height.


Detach the Seat from the Chair Bottom

Bring your chair to a place you can efficiently work on it where there’s a towel or cloth for cushioning. Take your screwdriver to open the chair’s mounting screws, which holds it to the bottom part. Once you’ve separated the seat from the bottom part, put it somewhere safe.


Adjust Height by Spinning Threaded Post

For an office chair with a threaded post, start by putting it upside down and lubricating the post. Clean excess oil using the rag, so the chair won’t slip while you work on it. Place a foot on the chair’s base, then turn the post either clockwise or counterclockwise. 

Depending on the seat, turning the post will adjust the height up or down. Continue spinning the post until you reach the height you want. Consider if you measure the height correctly and turn again if not. It might take a few spins, so continue until you reach a comfortable height. 


Raise Height by Attaching Wood Pieces

Some office chairs don’t have a threaded post or levers. In that case, adjusting the height will take some creativity. One way to do that is by placing a wooden piece between the bottom part and the seat. Get the drill and make a hole in the middle of a wood piece, enough so that the long screws can pass through.

Prepare wooden pieces equal to the number of screws. Once you’re done drilling, reattach the seat to the lower part of the chair. Do this while also connecting the wooden pieces between the two parts. Attach the screws and nuts to secure both the seat and bottom section. See if you’ve raised the seat height correctly. 


Did you enjoy this simple step by step guide on how to make office chair higher? I hope you do and that now, you are experiencing a comfortable time sitting on a properly adjusted office chair.

Let me what you think in the comment section below!

Leave a Comment